Zesto Audio’s Athena DAC

 

When I first learned Zesto Audio had added a DAC to their lineup, although pleasantly surprised, I did a double take. George Counnas is renowned for his analog designs but had never produced a digital product before. Upon further investigation, I learned George collaborated with a team of digital engineers well respected in their field. The team was headed by Peter Madnick. Peter has over 40 years of experience designing for many companies, including Elac, Audio Alchemy, Constellation, and Mobile Fidelity Sound Lab (MoFi/MFSL).

Knowing Zesto would not market any product that was not a top performer made me curious and excited. My DAC preference up to that point was R2R ladder technology, so I was somewhat hesitant when the Athena used a chip from ROHM Semiconductor. The design accepts formats up to 32-bit/384kHz files, with up to 8 X DSD (512kHz) and 8 PCM sample rates.

Carolyn Counnas designed the 16-gauge zinc-plated steel chassis shared by all Zesto products. The look is stylish and clean, and it stands out in an industry populated by silver or black rectangular boxes. At the same time, it looks perfectly at home and complements the appearance of any system. I can’t say the same for some other brands that tried to escape a monochromatic cuboid design.

 

 

 

 

The front panel is uncluttered, holding only one selector knob for the seven inputs (USB, 2 COAX, 2 Optical, AES/EBU, and I2S). Also on the front panel are small LEDs arranged in a flowing wave showing the bit size and sampling frequency. They are subtle, telling the listener what they need to know without shouting. In keeping with the uncluttered design, the power switch is located on the left end panel near the front. It is easily accessible yet does not interfere with the stylish look. The power switch shuts off the DAC completely. Because there is no standby mode, George recommends at least 15 minutes of warm-up before serious listening.

The Athena uses the same Energy Source Power Supply (ESP) used on Zesto’s phonostages and preamplifiers. The ESP is optimized for the tube output circuits and eliminates power limitation by anticipating the power needed. The Athena DAC employs two Gold pin JJ ECC82/12AU7 and two Gold pin JJ ECC832/12DW7 tubes. For those interested in tube rolling, George advises that the 12DW7 dual triode tubes have the biggest role in voicing because they handle the input as well as drive the output tubes. The 12AU7 output tubes drive true-differential balanced output transformers for significant noise cancellation. The Athena employs no negative feedback, no up-sampling, no output filters, and controlled 2nd-order harmonic distortion.

 

The rear panel includes both RCA and XLR outputs and a unique grounding switch for each channel so users can experiment with the ground on or off to eliminate ground loops and remove hum. I used the ground switches in the “on” position with Shunyata Sigma-X grounding cables and an Altaira chassis ground hub connected to the RCA outputs. Switching between ground on and ground off, I noticed a slight glare on vocals with the grounding switched off. I used the XLR transformer-balanced outputs (pin 2 hot) with a 300-ohm impedance. The RCA outputs also have an impedance of 300 Ohms. The maximum peak output level for each is 3 Volts RMS.

Unique to the Athena is a hidden knob feature that changes the slope of the digital filter roll-off for each input. The user pushes in the input selector knob, and all LEDs flash 3 times fast for fast or three times slow for slow roll-off. The default becomes the last one used. Each input can have its own slope rate.

Patience grasshopper. Despite a standard 50-hour factory burn-in on all circuits and vacuum tubes, the Athena sounded broken when it arrived. I thought there was a mismatch with my Aurender N30SA. Following George’s recommendation, I connected the DAC to a CD player set on repeat. An input signal is required to burn in the circuits, but a signal out is not required. Back in service at 344 hours found me smiling. I had an even bigger smile at 400 and then again past 450 hours. Now I was getting the performance I expected from Zesto.

Performance:

On the track “If it Be Your Will” from Jennifer Warnes’ CD Famous Blue Raincoat 20th Anniversary Edition [Shout Factory LLC, 826663-10490], the instrumentation is delicate and complementary, enhancing the vocals but not masking them. Jennifer Warnes exhales the words at the end of each line until they are barely a whisper. The Athena is an extremely quiet DAC. It extended each word farther than I had heard before, allowing the true emotion of the song to be felt. This is the finest rendition I have heard on my system.

The Athena raised my system to a new level of musical enjoyment. That was not a surprise, since I had enjoyed full Zesto electronics systems at every show I attended. They were always in my “favorites” list. Not one-trick ponies, they were consistently among the more engaging rooms using a variety of speakers. Zesto rooms were never the biggest and baddest. They were realistic and achievable. Equipment mere mortals could envision in their own homes. George Counnas is more than a talented engineer. He has the ear to get the best results. Or maybe Carolyn has the final vote. It might be a family secret.

Conclusion:

While I was surprised by a DAC from Zesto, I was not surprised by the performance. The Athena is the most analog-sounding DAC I have heard. That is to be expected from a company whose entire prior history was producing some of the finest-sounding analog equipment available. The Zesto all-analog legacy set a high bar for entry. The Athena DAC exceeds that bar and completes the Zesto lineup. The gorgeous Athena DAC is my new reference standard.

 

Key Features
ROHM Semiconductor BD34301EKV DAC chip
Bit-perfect: Native with No Up-Sampling
3 Bit Rates: 16, 24, and 32 
4 DSD Sample Rates: 64, 128, 256, and 512
8 PCM Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, and 384
4-layer copper Printed Circuit Board
No negative feedback
Upgradable for future technology
Each unit is hand-made in the USA
50-hour factory burn-in on all circuits and vacuum tubes

Specifications:
Price: $15,000
Inputs: One USB, Two Optical (S/PDIF), Two RCA Coax (S/PDIF), One AES/EBU,    One I2S
Outputs:   
One pair of true XLR transformer-balanced outputs (pin 2 hot) with an impedance of 300 Ohms
One pair of Single-Ended RCA outputs with an impedance of 300 Ohms
Maximum peak output: 3 Volts RMS
Vacuum Tubes:
Two (2) Gold pin JJ ECC82/12AU7
Two (2) Gold pin JJ ECC832/12DW7
Power
Power consumption 30W operational, 0W when off
100 to 120V AC 60Hz Standard 3-pin 15 Amp IEC power connector
220 to 240V AC 50/60Hz (factory installed option)
Dimensions: 17″ w X 12″ d X 5″ h
Weight: 25 lbs. (9.3 kg)
Shipping weight: 28 lbs. (12.70 kg)
Warranty: Two-year limited warranty with six-month warranty on vacuum tubes
Contact:
Sales and Marketing:
Carolyn: carolyn@zestoaudio.com
Phone: 805-807-1841
Engineering:
George: george@zestoaudio.com
Phone: 805-807-1840

Website: www.zestoaudio.com
Address:
Zesto Audio
3138 Calle Estepa
Thousand Oaks, California 91360, USA

Don’s Associated Equipment
Source Component Wall:
Shunyata Denali-X
Shunyata ALTAIRA chassis hub (CG-NR)
Shunyata SIGMA-X XC power cord
Shunyata SIGMA-X NR power cords (3)
Shunyata SIGMA-X grounding cables (4)
Aurender N30SA network transport
Valve Amplification Company (VAC) Master Preamplifier
Shunyata SIGMA-X USB cable
Shunyata SIGMA-X AES/EBU cable
Cardas Clear Beyond 1M & 5.5M XLR cables

Speaker Wall:
Shunyata Typhon T2 with umbilical cord
Shunyata DENALI 6000/S v2 power conditioner
Shunyata SIGMA V2 XC power cord
Shunyata SIGMA-X NR power cords (2)
Shunyata DELTA v2 NR power cords (2)
Shunyata ALPHA v3 and Alpha-X chassis ground cables
Cardas Clear Beyond speaker cables
VAC Essence 80 iQ monoblock amplifiers
Homemade walnut butcher block amplifier stands
IsoAcoustics GAIA II Neo isolation footers with carpet spikes
Yung Long Tiptoe spikes under stands
Sound Lab G5-4C speakers

Miscellaneous in Multiple Places:
Symposium Acoustics Svelte and Svelte Plus isolation platforms
Symposium Acoustics Rollerblock Jr. HDSE isolation feet
Finite Elemente Cerabase Slimline isolation feet
IsoAcoustic OREA Isolators
PolyCrystal cable elevators
Homemade walnut cable elevators
Shunyata Research Cable Cradle Wall Plates
Homemade acoustic panels 2’X4’ (7)